Tilting tables and clamping systems

CNC-Tilting table


Triebworx CNC-Tilting table with universal clamping plate

In this picture: Triebworx CNC-Tilting table with universal clamping plate


Problem: In order to avoid interfering contours and probe collisions in the contour and roughness metrology, test pieces have to be positioned at a given angle for inspection of defined characteristics.

Solution: In the CNC version, the Triebworx tilting tables can be used as a fourth axis on the T4HD, providing a perfect tilting position in the running CNC program.

Triebworx tilting table with centre clamping device

In this picture: Triebworx tilting table with centre clamping device


The Triebworx tilting table can be adjusted by +/- 45 degrees. It can be installed lengthwise or crosswise. Corresponding pin and screw couplings can be found in several positions. The Triebworx tilting table is available with universal clamping plate or with centre clamping device.

Triebworx manual tilting table
Even older constructions and third-party equipment can be upgraded with the manual version of the Triebworx tilting table. This will provide you with the opportunity to swivel your work piece easily without using tools or operating roughrunning rotary knobs. Contrary to some machine vices, the Triebworx tilting table is stainless, and a lightweight weighing only 2 kg. As slide-bearing contour measuring devices require less service, this system can save costs.


T4HD CNC Tilting tables

T4HD-SWT-UNI-CNC

T4HD CNC tilting table with universal clamping plate, weight approx. 2.5 kg

T4HD-SWT-ZSP-CNC

T4HD CNC tilting table with centre clamping device, weight approx. 3.5 kg

as well as on request:
Custom-build version, we deliver the device corresponding to your application.

Im Bild: Schwenktisch mit Grundplatte für kundenspezifische Aufbauten

In this picture: Triebworx tilting table for customer-specific application


Common technical data of all Triebworx T4HD CNC tilting tables

– Adjustment range +/- 45° without superstructure
– Resolution 0.006º
– Precision ≤ 0.1º
– Permissible load torque: 5 Nm
– Stainless design, lubricated for life
– 5 x 5 x 3 arrangement capabilities via pin or screw couplings
– Reproducible fast positioning via dowels of 3 mm diameter
– CNC operation as fourth axis on the T4HD is fully integrated in the Triebworx evaluation software. No additional costs for software options
– Dimensions (L x W) 166 x 166 mm


Triebworx tilting tables, manually adjustable

TX-SWT-UNI-MANU

Tilting table, manually adjustable, with universal clamping plate

TX-SWT-ZSP-MANU

Tilting table, manually adjustable, with centre clamping device

sowie auf Anfrage
Manually adjustable tilting table for customer-specific application


Common technical data of all Triebworx tilting tables:

– Adjustment range +/- 45° without superstructure
– Permissible load torque: 5 Nm
– Stainless design, lubricated for life
– 5 x 5 x 3 arrangement capabilities via pin or screw couplings
– Reproducible fast positioning via dowels of 3 mm diameter
– CNC operation as fourth axis on the T4HD is fully integrated in the Triebworx evaluation software. No additional costs for software options
– Dimensions (L x W) 166 x 166 mm




Triebworx centre clamping device

Triebworx centre clamping device

In this picture: Triebworx centre clamping device

The Triebworx centre clamping device is also available separately and facilitates the work on every contour and roughness measuring device. Contrary to some machine vices, it is stainless, super lightweight and can be operated without tools. The clamping jaws can be installed for ranges of 0 up to 50 mm or 50 up to 100 mm. On standard machine vices, the centre shifts according to the width of the test piece, so that the user always has to readjust it manually in the sectional plane of the measuring device. That not only costs time, money and energy, but is in the case of steel versions often accompanied by unsightly rust spots.


T4HD-ZSP166 and TX-ZSP200

Triebworx centre clamping device, standalone


Technical data for Triebworx centre clamping device, standalone

– Clamping range dia. 0-50 / 50-100 mm
– Stainless design, lubricated for life, maintenance-free
– Jaw width 86 mm, Jaw height 30 mm, Reversible jaws
– Jaws with six integrated prisms, hard-coated
– Reproducible fast positioning via dowels of 3 mm / 5 mm diameter
– Base plate feasible for various devices
– Dimensions (L x W) from 86 x 166 mm up to 200 x 200 mm
– Weight approx. 1.5 kg – 2.0 kg depending on version